Newlux WindPure W3050 Wood Bedienungsanleitung Seite 23

Assembly of the base
To assemble the base, which consists of three legs:
Take the two tubes that form a leg, upper tube (11) and lower tube
(12). Press the two protrusions on the lower tube and fi t them into the
grooves of the upper tube. Slide inwards until you hear a click. Then
insert the legs into the respective holes of the support (13) and screw
them tightly with the fi xed screws (10) so that they cannot come off.
Do the same procedure to dismantle them.
1. Fan Head Assembly
2. Fan Blade
3. Oscillation Knob
4. Speed Knob
5. Tilt Range Knob
6. Tilt Adjustment Bolt
7. Tilt Range Screw
8. Tilt adjust knob
9. Body
10. Fixed Screw
11. Upper Pipe
12. Lower Pipe
13. Holder
14. Height Adjustment Pipe
Head assembly
• Using a screwdriver, remove the tilt range screw
(7) from the coupling bracket on the fan neck
and then unscrew the tilt range knob (5).
IMPORTANT: Make sure the fan post and fan head are in the correct
orientation when assembled
15
13
10
11
12
23 |