Notes And General Warnings 34 - Autoclima RT MODULA SLIM Montage- Und Wartungsanleitung

IT EN FR DE ES
ENGLISH
NOTES AND GENERAL WARNINGS
Read this manual carefully from start to finish before installation.
For installation, it is important to strictly observe the instructions given in this manual.
The manufacturer declines all responsibility in the event of damages to people and things caused by incorrect installation or alterations
of the system.
Installation operations must be carried out exclusively by a specialised technician who is aware of the dangers connected with installation and
the relative prescriptions, in compliance with the standards in force and according to the instructions supplied by the manufacturer.
Use the protective devices and the equipment provided.
WARRANTY
Read the warranty certificate contained in the box of the system to correctly activate the product warranty.
Failure to perform the operations indicated will nullify the system warranty.
Use the system exclusively for the use envisaged by the manufacturer and make no arbitrary changes or alterations to the appliance.
AUTOCLIMA does not cover modified or transformed systems with a warranty.
The system is not designed for use in potentially explosive environments.
The system is not designed for use in a saline environment.
The instructions refer to the RIGHT and the LEFT and are related to the driver of the vehicle facing the direction of travel.
The cooling unit weighs about 30 kg. When handling, installing, repairing or using, please take whatever precautions are necessary in
order to avoid falls, damage and injuries. DO NOT handle alone.
Check that the vehicle structure is strong enough in the assembly area to sustain the weight and stress generated by the system.
THE FITTER MUST REINFORCE THE VEHICLE STRUCTURE IF NECESSARY.
During the assembly phases, making holes in parts of the vehicle, make sure that you do not damage the wiring or piping of systems already
installed.
USE APPROPRIATE PRODUCTS TO ADEQUATELY SEAL EVERY HOLE MADE IN THE VEHICLE WALLS.
You must accurately position the hoses and avoid tight curves, sharp corners or sheet metals that could damage them.
Make sure that throughout the route the hoses avoid siphons.
BEFORE INSTALLATION AND MAINTENANCE OF THE AIR CONDITIONER, DISCONNECT ALL CONNECTIONS TO THE VEHICLE
BATTERY AND TO EVERY OTHER SOURCE OF ENERGY. FAILURE TO OBSERVE THIS INSTRUCTION WILL EXPOSE THE FITTER
TO A RISK OF ELECTROCUTION AND PHYSICAL DAMAGE DUE TO THE MOVEMENT OF MECHANICAL PARTS (PULLEYS,
BELTS, ELECTRIC FANS).
If the electrical wires have to pass through walls with sharp edges, use protective pipes or specific channels.
Securely fasten the electrical wires, paying special attention to their route along metal walls that conduct electricity; also avoid contact with sharp
elements.
CHECK THE POSSIBLE NEED TO REPLACE THE VEHICLE'S ALTERNATOR WITH A MORE POWERFUL ONE TO COMPENSATE
FOR THE ELECTRIC ABSORPTION OF THE SYSTEM.
Connect the air conditioner to the vehicle power supply protecting the system with a fuse.
34/83