Technical Specifications - Fermax DUOX PLUS Installationshandbuch

2 Panel 1 or Camera 1 of the Monitor block
3 Panel 0 or Camera 0 of the General Entrance (G)
Auto switch-on operation with installed interface
In standby, press
cameras. Pressing sequentially, the display is:
Panel 0 or Camera 0 of the block itself (one or the other).
1
Panel 1 or Camera 1 of the block itself (one or the other).
2
Panel 0 or Camera 0 of the General Entrance (one or the other).
3
CAPACITIES: Up to 3 views in total will be available, which can be from panels or cameras.
Notes:
- When the monitor is in standby mode, the auto switch-on function
the monitor:
• If you do NOT pick up, sequentially pressing
• If you pick up, you have a maximum viewing time of 90 seconds, has the option to change the
camera.
- If the interface is programmed as Camera 0, when a telephone is picked up from its block, the user
will not hear or see anything (because the telephone does not display video and the interface does
not transmit audio).

6. TECHNICAL SPECIFICATIONS

Supply voltage
Standby consumption
Active consumption
Working temperature
Humidity
on the monitor to perform auto switch-on with different panels /
18 Vdc
140 mA (max.)
153 mA (max.)
-10 ºC to +55 ºC
5%, 90% non-condensing
allows 30 seconds to pick up
gives you the option to switch cameras.
24 Vdc
104 mA (max.)
110 mA (max.)
DUOX PLUS IP CAMERA INTERFACE
11