Faqs - Frequently Asked Questions; How Do I Configure The Fermax Ip Camera (Ref.9985) - Fermax DUOX PLUS Installationshandbuch

5. FAQs — FREQUENTLY ASKED QUESTIONS
5.1 How do I configure the FERMAX IP camera (ref. 9985)?
1. Power the camera with an external power supply (ref. 9982 with adapter ref. 9984) or
with a POE switch.
2. Connect an RJ-45 cable from the camera to your PC (the PC must be configured within
the IP range of the 192.168.1.xx Interface).
3. Open a browser and enter the IP address (192.168.1.64) that the camera has by default
if you want to change your camera's IP and port. The first time you are prompted to enter
a password and confirm it, enter fermax123 or your choice of password.
4. Enter user admin and password fermax123. Go to
Change the IP to 192.168.1.205, for
example.
Exit.
8
DUOX PLUS IP CAMERA INTERFACE
Video:
Resolution 720P, Video Quality Highest,
Frame Rate <30, Video Encoding H264,
Profile High Profile.
Basic Settings.
The port tab will show 554 for the RTSP
protocol.