IFM Electronic AC2508 Montageanleitung Seite 6

outputs
3 4
5
2 1
Socket M12
Switching output +
External power -
n.c.
LED green auxiliary voltage
Addressing
Assign a free address between 1 and 31. At the factory the address is
set to 0.
Addressing with the addressing unit AC1144
If the mounted and wired module is used with the FC-E lower part
AC5011 (with addressing socket), it can be addressed via the address-
ing cable (E70213).
Do not remove the addressing plug while live.
If it is used with the FC-E lower part AC5003 (without addressing sock-
et) the module must first be addressed via the addressing unit AC1144
and then mounted onto the lower part.
6
4x LED1 yellow
pin
4
3
1,2,5
LED2 red FAULT
fixture
infrared
adapter
LED green
PWR power
supply o.k
4 sockets
M12