Technical Data - Bosch AdvancedGrind 18V-80 Originalbetriebsanleitung

(7) Speed preselection
thumbwheel (AdvancedGrind 18V-80)
a)
(8) Battery release button
(9) Standard auxiliary handle (insulated gripping sur-
a)
face)
(10) Low-vibration auxiliary handle (insulated gripping
a)
surface)
(11) Protective guard for grinding
(12) Protective guard for cutting
(13) Cover for cutting
(14) Mounting flange with O‑ring
(15) Grinding disc
a)
(16) Cutting disc
a)
(17) Diamond cutting disc
(18) Clamping nut (UniversalGrind 18V-75)

Technical Data

Angle grinder
Article number
Rated voltage
A)B)
Rated no-load speed
Speed adjustment range
Max. grinding disc diameter/rubber
sanding pad diameter
Grinding spindle thread
Max. thread length of grinding spindle
Constant electronic control
Speed preselection
Soft start
Restart protection
Overload protection
Weight according to EPTA-Proced-
C)
ure 01:2014
Recommended ambient temperature
during charging
Permitted ambient temperature during
D)
operation and during storage
Compatible rechargeable batteries
Recommended rechargeable batteries
for maximum performance
Recommended battery chargers
A) Measured at 20–25 °C with rechargeable battery PBA 18V 6.0Ah.
B) Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed is
lower for safety reasons and according to production tolerances.
C) Depends on rechargeable battery, protective guard, and auxiliary handle in use
D) Limited performance at temperatures < 0 °C
E) The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Bosch Power Tools
a)
AdvancedGrind
3 603 CE5 100
V=
-1
min
-1
min 2800–12,000
mm
mm
kg
°C
°C –5 to +50
PBA 18V...W-.
PBA 18V...W-.
E)
(19) Quick-clamping nut with
bar (AdvancedGrind 18V-80)
(20) Two-pin spanner for clamping nut/round nut
(21) Handle (insulated gripping surface)
(22) Grinding spindle
a)
(23) Hand guard
a)
(24) Rubber sanding pad
a)
(25) Sanding sheet
a)
(26) Round nut
a)
(27) Cup brush
a)
(28) Open-ended spanner
(29) Extraction guard for cutting with cutting guides
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
UniversalGrind
18V-80 18V-75
3 603 CE5 000
18 18
12,000 12,000
125 115
M 14 M 14
21.7 21.7
●
●
●
●
●
2.4 2.3
0 to +35 0 to +35
–5 to +50
PBA 18V...W-.
PBA 18V...W-.
≥ 4.0 Ah ≥ 4.0 Ah
AL 18... AL 18...
English | 23
a)
UniversalGrind
18V-75
3 603 CE5 001
18
12,000
– –
125
M 14
21.7
● ●
– –
● ●
● ●
● ●
2.4
0 to +35
–5 to +50
PBA 18V...W-.
PBA 18V...W-.
≥ 4.0 Ah
AL 18...
1 609 92A 7GR | (13.07.2022)