Automatic Update Weight Unit; Pre-Set Account Or Heavy Check; Plu - Giropes Baxtran BCD-Serie Bedienungsanleitung

6.3.3 AUTOMATIC UPDATE WEIGHT UNIT

• The scales will automatically update the weight unit when a weight below the initial countable sample is added. A beep will sound when the value is
updated. It is advisable to check if the quantity is correct when the unit of weight has been updated automatically.
• To close the unit weight and prevent auto-updating, press
• This feature is turned off as soon as the number of objects added exceeds the account used as a sample.
6.3.4 PRE-SET ACCOUNT OR HEAVY CHEK
Weight check or pre-selected count is a procedure to trigger an alarm sound when the net weight (or number of objects) on the balance equals or exceeds the
number stored in the memory. The value to store is entered through the keyboard.
ESTABLISHING PRE-SELECTED LIMITIES
It is possible to establish a maximum and minimum limit for counting or weighing (using net weight). When the button
both count and weigh and then set the minimum and maximum limits. For example:
ACTION
PRESS
PRESS
PRESS
PRESS
PRESS
• Erase of any of the limits is allowed. Both erased limits will also disable preselection.
• The horn will operate as specified in the audible alarm parameter.

6.4 PLU

PLUs are used to store information about commonly used objects. The tare, description of the product and unit weight for an object are remembered by entering
a PLU to facilitate the procedure.
The balance is capable of storing values for the tare, description and unit weight for a maximum of up to 100 PLU. The tare value is necessary to calculate
net weight when a container is used during weighing. The descriptions are used to send data for RS-232 to view or print and the unit weight is used to count
pieces.
This information must be entered with a particular PLU before the weighing process starts so that the desired PLU can be remembered during the weighing
process. The information can be stored and remembered manually or SENDING information THROUGH the RS-232 interface.
DISPLAY
WEIGHT UNIT WEIGHT
PST nEt
WEIGHT UNIT WEIGHT
PST cnt
WEIGHT UNIT WEIGHT
Hi cnt 0.0234
WEIGHT UNIT WEIGHT
lo cnt 0.0234
WEIGHT UNIT WEIGHT
COUNT
IF YOU ARE CURRENTLY IN WEIGHT MODE
COUNT
TO CHANGE FROM WEIGHING MODE
COUNT
IS SAMPLE THE LIMIT MAXIMUM CURRENT, PRESS
FOR DELETE AND CHANGE IF IS NECESSARY
COUNT
IS SAMPLE THE LIMIT MINIMUM CURRENT, PRESS
FOR DELETE AND CHANGE IF IS NECESSARY
COUNT
RETURN TO HEAVY WITH THE ESTABLISHED LIMITS
OPERATION MANUAL BCD
is pressed the user can select
DESCRIPTION
EN EN
27