Herunterladen Inhalt Inhalt Diese Seite drucken

Zero And Tare Screen; Zero; Tare; Tare On A Remote Scale - Giropes Baxtran BCD-Serie Bedienungsanleitung

Zählwaage
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 57

6.1 ZERO AND TARE SCREEN

When the weight gross is between ±2% of zero introduced when is lights any balance then a new zero is action. When the weight gross it greater what ±2%
then acts the action tare.

6.1.1 ZERO

You can press the button
point is obtained the screen weight will show the indicator to "Cero".
The balance has a function re-zero automatic by but account of variations minimum o accumulations of material in the platform. Equally you can need
press
for put the balance a zero manually If small amounts of weight is show still y when the platform is empty.
6.1.2 TARA
Select the balance local or remote applicable by pressing the button
use a new value of tare, there's of methods for enter the value tare, the first method uses the value about the platform y the second used a value what must be
introduced previously by the user.
FIRST METHOD TO ENTER A TARE VALUE:
Balance a zero by pressing the button
Place a container on the platform, it will display a value of its weight.
Press the button
is she. the arrow about "net" is light. when is add product only is show the weight NET of this. The balance can be freak a second time if other type of
product has what be added to first. another time only the weight added after of tared be shown.
When is retire the container is show a value negative. If the balance was freak just before of remove the container this value, it the weight 's gross con-
tainer more the of all the products what he been removed. The indicator zero also is find in on because the platform goes back the same condition such
y as is found when the button
SECOND METHOD OF ENTERING A TARE VALUE:
This method the allows introduce a value tare for the weight from the keyboard. This it useful if all the containers the same o if the container already is
full but the weight NET it required and the weight of container it known.
Remove all the weight of the platform ; press the button
Introduce the value for the tare including the point decimal using the keyboard password; press
negative value equal to tare.
Place the container on the platform.
The, the display shows the weight of container less the of weight tare. When the container full is places about the platform the value tare be subs- brought
of weight gross showing only the weight NET of the content.
If the value introduced no agrees with the increase in the balance the balance rounded the value tare forwards the value closer possible. By example if a
value tare of 103g it introduced in a balance of 60kg with 5g of readability then the screen will show-105g.
The value tare for each balance it saved in memory for what no is lose when the balance active change.

6.1.3 TARE ON A REMOTE SCALE

Select the balance remote by pressing the buttom

6.2 FUNCTIONS MEMORY

The buttom
added the results of a heavy in the memory, regardless if the balance remote o local used.
6.2.1 MANUAL ACUMULATION
The values (heavy y told shown in the screen can be added the values in the accumulator by pressing the button
the weight total, the display "count" shows the amount total accumulated; and the display "unit weight" show the number of times that the objects
he been added the memory accumulated. The values can be shown during 2 seconds before of back the normality.
The balance must back a zero or number negative before what another sample sea added at the memory.
in any moment for power the point zero from the which one all the other pesos y accounts his measured. when the zero
, if it necessary. The arrow indicator about "zero" will be on.
for tared the balance. The weight shown is has stored as the value tare and this value it subtracted of the screen leaving zero
he was pressed for the last time.
and then follow the same procedures to tare as those mentioned in the sections previous.
. Pre-set what the values tare can be used with both types of spears. If you must
to zero in the screen
OPERATION MANUAL BCD
for store the value tare. the weight shows a
. The display "weight" shows
EN
EN
25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis