Fifine K651 Benutzerhandbuch Seite 6

Screw the lower part of the desk clamp until it is tight and secure.
•
Insert the boom arm (the end without screw) into the hole of desk clamp.
•
Tighten the screw.
•
Screw the shock mount to the boom arm via the included adapter.
•
TIPS:
• Mount to your desktop via the included desk clamp accurately:
Unscrew the desk clamp and slide it over the side of your desktop, making sure that
both the top of the desk clamp and the underside are resting on flat surfaces. Overly
rounded or overhanging desktop edges do not make good mounting surfaces.
• DON´T rotate the boom arm when the screw on the desk clamp is tightened.
Loose the screw first, adjust the position of the arm, and the tighten it.
INSTALLATION QUICK GUIDE
Place the mic through the hold, then tighten the metal ring on the bottom of the shock
mount. Tips: The side with a red warning sticker should be up.
6