TFA 60.5018.01 Bedienungsanleitung Seite 13

TFA_No. 60.5018_Anl_09_22
Radio-controlled projection alarm clock
with indoor and outdoor temperature
1. Delivery contents
• Radio-controlled projection alarm clock
• Temperature transmitter (Cat. No. 30.3250.02)
• Instruction manual
• Power adaptor
2. Range of application and all the benefits of your new instrument at a glance
• Digital projection of the radio-controlled time (DCF), indoor temperature or
outdoor temperature or all 3 options alternately onto a wall or ceiling
• Display of time and weekday written in full letters or abbreviated with date
• Outdoor temperature via transmitter (max. 100 m) and indoor temperature
• Highest precision radio-controlled clock
• With time zone and manual setting option
• Alarm with snooze function
• Backlight with 4 brightness levels and adjustable dimming function
• Projection with 2 brightness levels, can be rotated by 270°
• Languages for weekdays and menu: German, English, Spanish, French
3. For your safety
• This product is exclusively intended for the range of application described above. It
should only be used as described within these instructions.
Caution!
Risk of electrocution!
• Plug the device only into a mains socket installed within your country's electrical
safety regulations and with a correct mains voltage (see nameplate).
• The mains socket must be located near the equipment and it must be easily acces-
sible.
• Unplug the device immediately if any fault occurs.
• The device and the power adapter must not come into contact with water or mois-
ture. Suitable for indoor use only.
• Do not use the device if the housing or the power adapter are damaged.
• Operate the device out of reach of persons (including children) who cannot fully
appreciate the potential risks of handling electrical equipment.
• Only use the supplied power adapter.
• Do not pull the plug out of the socket by its cable.
• Route the mains cable so it does not come into contact with sharp-edged or hot
objects.
21.09.2022 11:01 Uhr Seite 13
– 24 –
Radio-controlled projection alarm clock
WARNING!
Risk of injury!
• Keep the devices and the batteries out of reach of children.
• Small parts can be swallowed by children (under three years old).
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is
swallowed, this can lead to serious internal burns and death within two hours. If
you suspect a battery could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged.
Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by
leaking. Make sure the polarities are correct. Never use a combination of old and
new batteries together, nor batteries of different types. Remove the batteries if the
device will not be used for an extended period of time. Avoid contact with skin,
eyes and mucous membranes when handling leaking batteries. In case of contact,
immediately rinse the affected areas with water and consult a doctor.
CAUTION
• Unauthorised repairs, alterations or changes to the product are prohibited.
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• The transmitter is splashproof, but not watertight.
4. Elements
Projection alarm clock (base station/receiver)
A: LCD display (Fig. 1):
A 1: Clock/alarm time
A 2: DCF reception symbol
A 3: Snooze symbol
A 4: Alarm symbol
A 5: Optional display
A 6: Battery symbol transmitter
A 7: Reception symbol transmitter
A 8: Outdoor temperature
A 9: Indoor temperature
A 10: Battery symbol base station
A 11: AUTO DIM symbol
– 25 –