Scope Of Delivery; Requirements; Legend - m-e VDV B90 Anleitung

VDV-B90
English
ADV-B40
VIDEO INTERCOM MODULE
VDV-B90
AUDIO INTERCOM MODULE
ADV-B40
Thank you for purchasing a product from m-e.
With this installation module it is possible to
equip or convert existing intercom systems, e.g.
those installed in letterboxes or pillars, with the
VISTADOOR system. Indoor units of the
VISTADOOR system as well as the VISTUS system
can be connected. It is suitable for integrating up
to 6 parties.
This intercom module has an integrated radio
module with which the additional receivers of the
radio doorbells from the Bell and FG series can
be controlled.

Scope of delivery

• Technology Box
• Loudspeaker module incl. 50 cm connection
cable
• Microphone module incl. 50 cm connection
cable
• Camera module incl. 50 cm connection cable
(only VDV-B90)
• Adhesive pads for fixing
• Light sensor incl. 50 cm connection cable
• External camera (Procamo system)
• Top hat rail power supply Mod. DT 2000
• Power supply unit Mod. ST 1000

Requirements

Simple NO contacts per accommodation unit are
required as bell push buttons. If loudspeaker and
microphone are present, they must meet the
following specifications to work with the built-in
module:
Loudspeaker
Impedance: 8 Ohm
Output: min. 0.5 watt
Microphone
Electret microphone with phantom power 5
Volt (polarity must be observed)
If the technical specifications are not known, you
should replace the existing speaker and
microphone with the supplied speaker and
microphone to avoid problems with voice
transmission.

Legend

1. technology box
2. housing cover
3. cable entry
4. terminal (button, micro, loudspeaker etc.)
5. terminal (connection indoor units)
6. terminal door opener + power supply
7. dip switch for ID code
8. dip switch for door opener time
9. terminal external camera
10. volume potentiometer
11. mounting holes
12. unlocking the housing cover
16