Long Idle Periods; Waste Disposal; Warranty - CAN FC-Serie Handbuch Für Installation, Betrieb Und Wartung

GAS HOB UNITS WITH GLASS RECESSED LID ▪
KNOBS
ATTENTION!
During and after cleaning, check that no nozzle hole is obstructed by impurities or whether
any detergent residues remain at the bottom of the burner cups. If so, remove the impurities
and residues by vacuuming them, without using liquid detergent or similar.
Only for products with steel or chrome-plated iron pan holders: progressive burnishing of the
pan holders is caused by normal use of the appliance and does not jeopardise its performance.
After cleaning, make sure that the pan holders have been put back in place correctly, paying attention not
to invert them or couple them to different burners. The pan holders must always be stable and sit without
rocking on the hob unit or be set firmly inside the specific fixing seats.

LONG IDLE PERIODS

If you do not expect to use the appliance for a long period of time (beyond 2-3 weeks) proceed as follows:
▪
clean the appliance thoroughly;
▪
disconnect or safely interrupt the electrical and gas supply.

WASTE DISPOSAL

The symbol of a crossed out bin indicates that the product must be sent to suitable separate
waste collection facilities. Do not dispose of the appliance bearing this symbol together with
normal household waste.
ATTENTION!
Unlawful or incorrect disposal of the product entails application of the sanctions set forth by
current legal standards.
Abide by the standards in force in your country. Make the appliance intended for disposal unusable by
removing the power cables.

WARRANTY

The warranty terms and conditions set forth by law apply. If the product should be found to be faulty,
contact the nearest Authorised Assistance Centre or your Dealer.
To open a warranty claim, it is necessary to submit the following documents:
▪
copy of the invoice with the date of purchase of the product;
▪
description of the fault;
▪
pictures and/or videos explaining the problem encountered;
▪
picture of the product data plate with the identification of the model and serial number.
144
Use a soft cloth slightly soaked in neutral detergent.
Make sure that the detergent does not leak under the knobs.
Do not remove the knobs from the pin they are mounted on.
Please note: follow the manufacturer's instructions to see how to use the
cleaning products.
FC series