Fc1352; Technical Data Sheet: Fc1352 - CAN FC-Serie Handbuch Für Installation, Betrieb Und Wartung

TECHNICAL DATA SHEET: FC1352

Dimensions
Nominal values:
1 x AUXILIARY burner (AUX):
Hob Unit
Pn 1.10 kW – injector ø 0.52 mm – consumption 80,00 g/h
(straight valves with
2 x SEMIRAPID burner (SR):
bypass Ø 0.36 mm
Pn 2.00 kW – injector ø 0.70 mm – consumption 145,50 g/h
and Ø 0.40 mm)
Total nominal power: 5.10 kW
Total nominal consumption: 371.00 g/h
Device Class
CLASS 3 – Recessed hob unit
(EN 30-1-1 4.3)
Device Category
CATEGORY I
(EN 30-1-1 5.1.1.2)
Admitted Gases
GAS OF THE THIRD FAMILY
family
(EN 437)
(EN 30-1-1 4.2.2.4)
Gas Supply CATEGORY I3 B/P
CATEGORY I3+
Electric Connection
ELECTRIC CONNECTION IN EXTRA-LOW VOLTAGE - 12V / DC
(only for "E" version with
electronic lighting)
Lighting
Gas Connection Galvanised steel train: Ø 8 mm - 1 mm thick
smooth end piece (30 mm) suitable for press fitting connecting with rigid / flexible hose
Gas Capillaries
Copper capillary pipes: Ø 4 mm – 0.5 mm thick
Aluminium capillary pipes: Ø 4 mm – 0.8 mm thick
Materials
Declaration of
Conformity
(GAR 2016/426/EC)
Width 748 mm
Depth 310 mm
Height 54 mm (hob area depth)
110 mm (gas circuit depth)
Weight 5.8 kg
▪
I3 B/P
▪
I3+
▪
Butane (G30) 30 mbar
▪
Propane (G31) 30 mbar
▪
Butane (G30) 28-30 mbar
▪
Propane (G31) 37 mbar
▪
S (MANUAL) – using external igniter
▪
E (ELECTRONIC) - 12 V/DC GENERATOR - SPARK - 10Kv @ 30 pF
▪
Stainless steel AISI 304
▪
Glass
▪
Chromium-plated iron
▪
Zama
▪
Brass
▪
Copper
▪
Galvanised steel
▪
Aluminium alloy
▪
Enamelled steel
▪
Epdm
▪
no asbestos
▪
suitable materials according to chapters 2 and 3 (Annex I)
▪
there are no welds with melting point lower than 450°C
▪
flammable materials were not used
▪
the materials are suitable according to the requirements of chapter 3.7
Installation, use and maintenance instruction manual
▪
Ed. 10/2021 Rev. 03
107