Instructions For Use; Description - CAN FC-Serie Handbuch Für Installation, Betrieb Und Wartung

INSTRUCTIONS FOR USE

DESCRIPTION

See the exploded drawings on the following pages for the position of the components listed in
the table.
.
pos
Chrome-plated wire grid (1A-1B), made of enamelled
1
flat wire (1C) or steel (1D-1E)
2 Ring for glass lid
3 Glass lid
Hinge for glass lid:
4
round (4A) square (4B)
5 Rubber protection
6 Silent block for resting lid
7 Fixing screws cap
8 Hob unit fixing screw
9 CE label
10 Metal moulding
11 SR burner cup with injector nozzle
12
Gas capillary pipe for SR burner
13 Gas cock with safety valve
14 AUX burner cup with injector nozzle
15
Gas capillary pipe for AUX burner
16
Main gas train
17
SR burner spreader
18 Enamelled lid SR burner
19 AUX burner spreader
20 Enamelled lid AUX burner
21 Lid and flame spreader fixing screws
22 Rubber feet/bushings for pan support
23 Knob for gas cock
24 Gas cock fixing nut
25 Control panel sticker
26 Piezoelectric igniter (versions P)
27 Ignition glow plug (versions P and E)
28 Thermocouple
29 Burner stud bolt
30 Thermocouple fixing nut
31 Glow plug fixing clip (versions P and E)
32 Hinge and silentblock fixing screw
33 Glass support rubber buffer
124
component
.
pos
Bushing for pan retaining system (versions
34
with FP extension)
35 Single-pole lighting button (versions E)
36 Long thermocouple
37 Long glow plug (versions P and E)
Catenary for electronic ignition (versions E only with
38
under-knob ignition)
12V spark generator for electronic ignition (versions
39
E only)
40 Generator support bracket (versions E only)
41 Silicone gasket AUX burner 2nd series
42 Silicone gasket SR burner 2nd series
43 Silent-block fixing screw
44
Silent-block fixing washer
45
Metal moulded reinforcement bracket
46 self-tapping screw for fixing accessories
47 Self-adhesive perimeter gasket
Positive cable (+) electronic ignition connection
48
(versions E only)
Positive cable (+) electronic ignition generator/
49
button connection (versions E only)
Negative cable (-) electronic ignition connection
50
(versions E only)
51 Fixing screw for 3rd series burners
component