Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
It is very easy and simple to install and operate the SHX fan heater.
1. INSTALLATION
1.
Remove the fan heater from the packaging and remove all packaging materials.
2.
Check the appliance for possible damage.
3.
Unwind the power cable and check it for damage too.
4.
Set the fan heater up on a stable, level surface where it will not tip over and which is not
heat-sensitive.
5.
Now insert the power plug into a suitable power socket.
6.
To operate the appliance via remote control, the safety tab on the back of the battery
compartment must be pulled out.
Please follow the instructions on assembling the appliance
provided in the safety information section very carefully.
2. DESCRIPTION OF THE CONTROL PANEL AND REMOTE CONTROL
The fan heater functions can be set with the remote control or directly on the appliance using the
control panel buttons.
To operate the appliance via the remove control, point it directly at the sensor on the housing to
ensure smooth operation.
COMMISSIONING
ATTENTION
151
Werbung
Inhaltsverzeichnis
