Cleaning And Maintenance; Noise Emission - AEG HSM/R 5614 Bedienungsanleitung

Thinning function
• Slide the button towards "
• Only the hairs which meet the blade first are cut.
• Slide the button towards " " to turn off the function.
Finish Operation
• Switch off the appliance. "OFF" can be seen on the switch (6).

Cleaning and Maintenance

• Regular cleaning and maintenance ensures optimum results and long lifetime.
• Turn the unit off and disconnect from mains power supply, if necessary.
WARNING:
• Do not submerge the unit in water.
CAUTION:
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
• Use the cleaning brush to remove remaining hair after use.
• Remove the attachment comb.
Attach/Remove Clipper Head
The clipper head is locked to the casing.
1. Slide the button towards " ".
2. Push back the clipper head with both thumbs to open the catch.
3. Regularly apply 1 - 2 drops acid-free oil to the clipper head.
4. Replace the clipper head after cleaning first at the bottom and then at the cutting area.
5. Clean the casing with a slightly damp cloth, if necessary.
6. Replace the attachment comb.

Noise emission

The workplace-related emission value is less than 70 dB(A).
". The blade is partly covered.
English
45