Memory Function - Braun bp 1700 Handbuch

6075360_BP1700_KAZ Seite 18 Donnerstag, 19. Juli 2007 8:35 08
18
5. Press the I/O button to turn the product off. Otherwise
the product will turn off automatically after 2 minutes.
If at any time, you want to stop the measurement, press
the red I/O button.

Memory function

Your blood pressure monitor can store the readings of
90 measurements (BP 1700 model: 60 measurements).
Storing is done automatically after each completed
measurement. The memory is nonvolatile. This means
that you will not lose stored data when changing batteries.
The memory cannot be cleared. Once the memory is full,
the oldest values will be overwritten.
The BP 1750 model features also an average function to
display the average reading of the last three measure-
ments.
Recalling stored and average readings
• To recall stored and average readings, first turn the
device off.
• Then press the memory button («memo») (B).