Fox MINI MICRON Bedienungsanleitung Seite 3

• Push down the toggle switch and release to activate the unit.
• Push up and release the toggle switch in the top position to deactivate the unit.
Please ensure the unit is switched off before attempting to fit the Mini Micron
hardcase.
• Do not use excessive force when fitting the hardcase as this may result in damage
to the alarm.
Volume can be cycled incrementally
by presseing the volume button and
then releasing.
Tone can be cycled incrementally
by pressing the tone button and
the releasing.
Sensitivity can be cycled
incrementally by presseing the
sensitivity button and then
releasing.
The LED intensity can be toggled
between three different intensities.
Simply hold down the volume and
press the tone button.
Each time the tone button is
pressed the LED intensity will
change.
When the Mini Micron batteries are too low the LED's will automatically begin to flash
red every 2 seconds. They will remain flashing red until new batteries are inserted
into the alarm. Once new batteries have been placed into the Mini Micron the LED's
will cease flashing and return to normal.
No audible low battery warning is given by the Mini Micron.
Power Out Socket allows Fox Illuminated Bite Indicators to be powered directly
from the Micron. The Illuminated Bite Indicator will then light up when the Micron is
activated and latch for approximately 20 seconds.
2