1.
Classification
Form of electric shock protection
Degree of electric shock protection
Degree of protection from harmful invasion of water
Depending on the mode of operation
Conformite Europeenne Mark.(Medical Devices)
1370
V~ : AC (alternating current) voltage source
ㅣ
: On (power: connectino to the mains)
: TYPE BF APPLIED PART
: This way up
: Use no hooks
: Manufacturer Mark
:
: CLASS II equipment
The disposal of waste products / residues, etc.
* Pull the marked area to exchange the fuse (related to service engineer)
* The equipment has to be installed at place built protective device having appropriate breaking
capacity so that prospect short-circuit current do not exceed 40 A .
42
Explanation of mark, delivery, and storage
CERAGEM
CLASS Ⅱ EQUIPMENT
TYPE BF APPLIED PART.
Ordinary
Continuous operation.
O : Off (power: disconnection from the mains)
: Attention, consult Accompanying documents
: Keep dry
: Fragile (handle with care)
: Serial number Mark
: Refer to instruction manual/booklet sign
: General prohibition sign
20
: Ingress Protection
2 : Protected against access to
hazardous parts with a finger.
0 : Not-protected against ingress
of water with harmful effects.
Do not disassemble and contact the customer
service center when problem occurs with a fuse.
Capacity of a fuse : AC 250V, T4AL
4
Time-Lag,
4A,
Glass Body Fuse