Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Installation
4
Please connect the Remote Control, External Projectors and cable properly.
포장박스에서 제품 및 부속품을 꺼내세요.
5
Assemble the remote control cradle onto the frame and place the remote
control onto the cradle. Check the connectors for the SD card, remote control
and the external projector and connect appropriately.
Please keep earphones plugged in only when in use.
Please make sure that the sticker side of the SD card is facing up before inserting into the main body.
After turning the power off, please push the SD card all the way in.
Caution
Do not touch signal input, signal output or other connectors, and the patient simultaneously.
Do not touch the connector pin.(Can cause bodily harm or mechanical failure.)
Warning
6
Connect the power cord onto the main body and plug into a socket.
If the power cord is connected when the power switch is "On", it can cause mechanical failure.
Caution
or
Remote
Earphone
control
SD card
SD CARD
External
projector
.
15
Werbung
Inhaltsverzeichnis
