Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
* The duration of operation modes can vary depending on the body type of the user.
3. How to use the product (by mode)
Mode 1~9
26
(Mode Duration: Approx. 36 minutes 30 seconds, Mode 2 : Approx. 18 minutes)
1. Turn on the remote control power supply and check the display.
- External projectors appear only when they are connected.
- The current strength and temperature are displayed.
2. Pressing the mode 1, 2, or 3 ~ 9 key twice (once for Manual mode)
causes the Ceragem Sound to be played and body sensing to begin
at the sound of the buzzer. Please lie down with correct body posture.
3. Once body sensing is completed, the mode is automatically
executed. Assume correct body posture.
- The operating time is displayed on top of the body icon.
- Once the mode is complete, the buzzer will sound, and the remote
control will turn off.
- Refer to pages 21-23 for information on strength, temperature, and sound settings.
Mode 1
Mode 2
(18 minutes)
- Pressing the key once causes the current active mode to blink for
3 seconds. Pressing it again within 3 seconds changes the mode.
- If in Manual Mode, please note that the mode will be changed
immediately without blinking.
- The display showing operating time blinks while the internal
projector moving to the head's position before body recognition.
1
Press twice to select Mode 1
2
Press twice to select Mode 2
Long-press.
(Select modes 3~9 in sequence.)
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Werbung
Inhaltsverzeichnis
