Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. How to use the product (by mode)
Manual Mode
28
(Mode Duration: Approx. 60 minutes)
1. Turn on the remote control power supply and check the
display.
- External projectors appear only when they are connected.
- The current strength and temperature are displayed.
2. After pressing the manual mode key twice, move the
internal projectors to the desired position.
3. Thermal stimulation begins from the designated position.
Assume a correct body posture
- The operating time is displayed on top of the body icon.
- Five minutes after the remote control is activated, the internal projectors
automatically move to prevent burns.
- Sixty minutes after being activated, the remote control is automatically turned
off, and the mode is terminated.
- Refer to pages 21~23 for information on strength, temperature, and sound settings.
- Pressing the key once causes the current active mode to blink for
3 seconds. Pressing it again within 3 seconds changes the mode.
- If in Manual Mode, please note that the mode will be changed
immediately without blinking.
.
Werbung
Inhaltsverzeichnis
