Inhaltsverzeichnis
Werbung
GB
8.5
Working with rotary instruments and
foot
control
Order
No.
8.5.1
Take required rotary instrument out
of the instrument holder.
8.5.2
If necessary, preselect spray by
pressing switch
once.
i
Note!
Switch
has no function!
8.5.3
Start instrument by pressing down
lever
. Set the speed required by turning
the lever
in the direction of the arrow .
8.5.4
The rotary instrument stops when
the foot lever
is released.
8.5.5
Reinsert the rotary instrument
correctly in the instrument holder
i
Note!
If an instrument is incorrectly placed in the
instrument holder
, the other instrument
is also disabled, or if two instruments are
removed simultaneously, both are disabled
for safety reasons.
!
Attention!
Regulations for prevention of accidents are
to be observed!
Never exceed the maximum permitted
speed and pressure specified for an
instrument by the manufacturer.
Protective glasses must be worn when
processing with rotary tools.
8.5.6
When using the KL700 motor, set
the desired maximum speed of 2,000 -
-1
40,000 min
on potentiomenter
i
Note:
The maximum speed to be set can be
determined by multiplying the set value with
the maximum speed, e.g.:
Set value:
max. speed:
0.6 x 40,000 = 24,000 min
8.5.7
The direction of rotation of the
KL700 motor can be preselected with foot
pushbutton
. Reverse rotation is indicated
by the yellow LED of the middle instrument
holder
.
!
Attention!
Regulations for prevention of accidents are
to be observed!
Never exceed the maximum permitted
speed and pressure specified for an
instrument by the manufacturer.
Protective glasses must be worn when
processing with rotary tools.
18
622
6441.
.
.
0.6
-1
40,000 min
-1
FR
ES
Werbung
Inhaltsverzeichnis
