Herunterladen Inhalt Inhalt Diese Seite drucken

Get Started; Care And Cleaning - RUSTA SILENCE Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

GET STARTED!

1. Remove all components from the packaging.
2. Connect the hose to the main body of the cleaner, ensuring it locks into position. (Fig. 1)
To release the hose: rotate the connector counterclockwise and pull it. (Fig. 2)
3. Connect the other end of the tube to the carpet and floor nozzle. (Fig. 3)
USE
1. Pull the power cord out and plug it into the power supply. Do not pull the cord beyond
the red marker. (Fig. 4)
2. Adjust the telescopic tube to the desired height by moving the telescopic tube
adjuster and raising or lowering the tube to the most comfortable cleaning position.
(Fig. 5)
3. The floor nozzle is ideal for cleaning for various floor types. Brushes are lowered
to protect the floor.
4. Switch the cleaner on by pressing the on/off pedal on the main body of the cleaner.
(Fig. 6)
5. Adjust the power level by pressing the variable power control button or by sliding the
variable power control slider. (Fig. 7)
6. Adjust the suction regulator to the desired level.
7. Switch off after use by pressing the on/off pedal. Unplug and retract the power cord
back into the cleaner.

CARE AND CLEANING

EMPTYING THE DUST CONTAINER
If the bag check indicator is red please check and, if necessary, replace the bag.
1. Lift the bag door release latch to open the bag door, pull the bag holder and
pull the collar of the bag to remove it. (Fig. 8)
2. Apply the peel and seal sticker located on the bag collar to the bag inlet.
The full dust bag should be disposed of correctly and carefully. (Fig. 11)
3. Fold a new bag as shown on the bag and fit by inserting the collar into the bag holder.
4. Refit the bag holder and close the bag door.
WARNING! The bag door will NOT close if the dust bag and/
or the bag holder are not properly assembled on the cleaner.
Always ensure the bag and bag holder are present when
closing the bag door.
REMEMBER! The bag check indicator LED may also be lit if an obstruction has occurred.
In this case refer to "Removing a blockage from the system".
8

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

901513180101

Inhaltsverzeichnis