The bag check indicator LED turns off once the cleaner has switched
off to signal that the thermal cut out has been activated. If this
should happen, switch the cleaner off, unplug and correct the fault.
It will take about 30 minutes for the cut out to automatically reset.
TROUBLESHOOTING
Should you have a problem with the product, complete this simple user checklist before
calling your local service.
• Is there a working electricity supply to the cleaner? Please check with another
electrical appliance.
• Is the dust bag over-filled? Please refer to "Care and cleaning".
• Is the filter blocked? Please refer to "Cleaning the filter".
10