Care And Maintenance - La Sommeliere APOGEE150 Gebrauchsanweisung

Create peak date alerts
To create peak date alerts, it is mandatory to enter a minimum aging time (greater than 0) and a
maximum aging time on the wine sheet. The conservation time is expressed in years. You will be sent
an alert for the start and end of the peak date if your bottle has not been consumed. A wine from the
year "X" with a minimum conservation time of 5 years and maximum of 10 years will alert you as
follows:
- Year "X" + 5 years: Early peak date alert "Your bottle is ready to be tasted"
- Year "X" + 10 years: End of peak date alert "Your bottle is at the end of its peak date"
Create stock alerts
To better manage your cellar and your wines, VINOTAG® offers you to set up stock alerts:
•
Via the view of your cellar on the application, click on the desired bottle to access the
associated wine sheet
•
Click on "schedule an alert"
•
Indicate from how many bottles remaining you wish to receive a stock alert
•
Click on validate. The stock alert is now activated.
To deactivate a stock alert, click on "modify alert"; decrease the number of desired bottles until
"deactivate". Click on validate. The stock alert is now deactivated.
Visualize the location of your bottles in your cellar
•
You are in sight of your cellar; Use the search icon located at the top left of your screen
•
Indicate the name of the wine sought and / or domain and / or other information related to
the bottle
•
The wine file of the bottle sought is displayed
•
Click on the button located at the bottom of the page "See my bottles" or on the "Position in
the cellar" button located at the beginning of your wine file

6. CARE AND MAINTENANCE

Before cleaning your appliance (something that should be done regularly), disconnect it by removing
the plug or by pulling the fuse on the circuit.
Before using your appliance for the first time and regularly after that, we recommend that you clean
the inside and outside (front, side and top) with warm mixed with a gentle cleaning product. Rinse with
clean water and allow drying before reconnecting. Do not use solvents or abrasives.
When the appliance is switched on for the first time, there may be a residual smell. In that case, runt
the appliance empty for a few hours at the coldest possible temperature. The cold will kill any smell.
Automatic defrost
ENGLISH
58