Functional Description - Bosch PDA 240 E Originalbetriebsanleitung

16 | English

Functional Description

Read all safety warnings and all in-
structions.
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for dry sanding and pol-
ishing of wood, plastic, metal, filler, as well as for
painted surfaces. It is ist especially suitable for
profiles, corners or hard to reach locations.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Vacuum connection
2 Thumbwheel for orbit frequency preselection
3 On/Off switch
4 SDS button for release of the sanding plate
5 Sanding sheet*
6 Sanding plate
7 Pad extender*
8 Sanding plate for extender*
9 Velcro backing for sanding tongue*
10 Narrow pad extender*
11 Narrow rounded pad extender*
*The accessories illustrated or described are not in-
cluded as standard delivery.
1 609 929 M19 | (20.8.07)
Failure to follow the
Technical Data
Delta Sander
Article number
Rated power input
Output power
No-load speed
Orbital stroke rate
Sanding plate size
(corner to corner)
Orbit diameter
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V.
For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
20.08.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
PDA 240 E
0 603 346 7..
W
W
rpm 6500 – 8500
opm 13000 – 17000
mm
mm
kg
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools
240
95
93
2,0
1.1
/ II