Klarstein VITA PRO Bedienungsanleitung Seite 39

Mode change
Long press the selection knob (3 seconds) to cancel the operation, and then turn
the knob to change the mode.
Lamp function
Press the ON/OFF button after power on, all lights on the control panel light up,
press the lamp button
any time under any operation mode.
Heat preservation function introduction
Press the ON/OFF button after power on, all lights on the control panel light up,
then press the button to start the heat preservation function ,press the TEMP
button and the buzzer will ring, the "K-WARM" icon lights on, other icons are off;
rotate the knob to select the required temperature for heat preservation, press
the "time" button, the buzzer will ring, rotate the knob to select the required time
for heat preservation, press the knob to start working. The screen displays the set
temperature and the remaining time.
Notes
• The above settings are all directional, we can't guarantee the best setting of
your ingredients when the origin, shape, size and brand of ingredients are
different; You can set it according to the actual situation,the larger the amount
of food you cook, the longer time it takes.
• During cooking some food, pulling out the pot and turning over the food can
help to cook more evenly and cook better.
• If the ingredients are not well cooked enough, it can be put back to the pot
directly and cooked with an appropriate time.
• Marinate food should penetrate into the interior of the food, to taste better
and more delicious.
to turn on the lamp. The lamp can be turned on or off at
EN
39