Viatom Checkme Lite Benutzerhandbuch Seite 7

finger that put in the SpO2 sensor. Just fit it inside but gently to ensure good
blood perfusion.
(1) Put the right forefinger into the built-in SpO
(4)
squeeze the edge of the SpO
left to raise it up as shown below.
(2)
Press the right thumb on the right electrode.
(3)
Press the right middle finger on the back
electrode.
(4)
Press the left electrode to the left palm.
3. Once the device detects stable waveform, it wil
automatically
countdown bar moves from left to right.
4. When the bar is fully filled, the device will analysis your data, and then show the
measurement result.
3.3 ECG Recorder
Different methods of taking the ECG measurement are available on Checkme. The ECG
recorder offers two different methods to measuring ECG:
Lead I: right hand to left hand

Lead II: right hand to left abdomen or left knee

Please keep stable posture and stay calm during the measurement. Movements
may result in interference and incorrect readings or analysis result.
2
start the measurement.
sensor. Use the finger nail to
2
sensor cover, then move in upward to the
The
6
(1)
(2)
(3)