Creality CR-5 Pro Benutzerhandbuch Seite 9

3. Level the Platform
1. Slightly tighten the four levelling nuts as the bottom of the platform before first
levelling.
2. Select "Settings" → "Level mode", click on the number 1-5
3. Offset value valid of automatic levelling and the default automatic levelling return
home in printing process which make an excellent result of printing when
automatic levelling starting.
4. Offset value invalid of automatic levelling and it will reduce the time to levelling
printing process when automatic levelling shut down.
Notes: The UI information is only for reference, the actual UI may be different.
4.
Move the nozzle near the top of the levelling screw, twist the screw left or right to make
the distance between nozzle and the platform is as thick as a piece of A4 paper. Levelling
the four corners in order, click 5 to verify whether the gap between nozzle and platform
is proper or not.
9