Creality CR-5 Pro Benutzerhandbuch Seite 4

NOTES
Do not use the printer any way other than described herein in order to avoid
•
personal injury or property damage.
Do not place the printer near any heat source or flammable or explosive objects.
•
We suggest placing it in a well-ventilated, low-dust environment.
Do not expose the printer to violent vibration or any unstable environment as
•
this may cause poor print quality.
Before using experimental or exotic filaments, we suggest using standard
•
filaments such as ABS or PLA to calibrate and test the machine.
Do not use any other power cable expect the one supplied. Always use a
•
grounded three-prong power outlet.
Do not touch the nozzle or printing surface during operation as they may be hot.
•
Keep hands away from machine while in use to avoid burns or personal injury.
Do not wear gloves or loose clothing when operating the printer. Such as cloths
•
may become tangled in the printers moving parts leading to burns, possible
bodily injury, or printer damage.
When cleaning debris from the printer hotend, always use the provided tools. Do
•
not touch the nozzle directly when heated. This can cause personal injury.
Clean the printer frequently. Always turn the power off when cleaning, and wipe
•
with a dry cloth to remove dust, adhered printing plastics or any other material
off the frame, guide rails or wheels. Use glass cleaner or isopropyl alcohol to
clean the print surface before every print for consistent results.
Children under 10 years of age should not use the printer without supervision.
•
This machine is equipped with a security protection mechanism. Do not manually
•
move the nozzle and printing platform mechanism manually, while booting up,
otherwise the device will automatically power off for safety.
Users shall comply with related nation and region's laws, regulations and ethical
•
codes where the equipment or produced prints by it is used, and user of our
product shall not use aforesaid products to print any end-use products, objects
parts or components or any other physical prints that violate the national or
regional laws, regulations and ethical codes where herein referred products,
objects, parts or components or any other physical prints that violate the national
or regional laws, regulations and ethical codes where herein referred product
and produced prints by it is located.
Tips: The upper cover is special for high – temperature consumables (e.g ABS)
•
and low-temperature consumables are removed (e.g PLA)
Tips: Do not plug or unplug the power cord when power on.
•
4