Open Window Detection - Klarstein WONDERWALL SANTORINI SMART Bedienungsanleitung

Screen display
1. Weekday
2.

Open window detection

3. Timer symbol
4. WLAN symbol
5. Time
6. Temperature
Open window detection
This heater is equipped with an open window detection function. If the control
system detects that the room temperature has dropped drastically in a short
period of time while the heater is in heating status, it detects that a window is
open. The window sign on the screen will start flashing and the heater will turn
off for 30 minutes. After 30 minutes, the unit automatically returns to the previous
setting.
You can deactivate and activate this function by pressing and holding the - button
for 5 seconds, whereupon the open window symbol on the screen disappears or
reappears.
Resetting the WLAN
Switch on the unit and press the WIFI button for 5 seconds until the WLAN
indicator starts flashing to reset the WLAN connection.
Activate / deactivate WLAN function
Press the Timer button for 10 seconds to deactivate the WLAN function of the
heater. The WLAN symbol on the screen disappears. Press the Timer button for 10
seconds to reactivate it.
EN
27