Damage To The Product; 3.3.2. Disinfection; Risk Of Explosion - MAVIG GD50S101-PH Gebrauchsanweisung

Damage to the product

In oder to avoid damage to the product no aggressive, abrasive, caustic,
bleaching, akaline, acidic or corrosive agents should be used (e.g. solvents,
acetates, scouring agents, chlorine etc.).
Electric shock – Danger of death
Extreme caution must be taken when cleaning live equipment!
SAFETY-
RELEVANT
Liquids must never be allowed to enter the system, e.g. the sockets or end
devices.

3.3.2. Disinfection

Only use wipe disinfection.
 No liquid may penetrate the product.
 The applied reprocessing process must comply with the applicable legal regulations and
guidelines.
 Hygiene procedures and conditions are the responsibility of the operator and must be
determined by him.
 Ensure that the materials used are compatible (e.g. stainless steel, aluminum, plastic,
lead acrylic, lead glass, PVC, natural, silicone or synthetic rubber, chromed, painted or
coated surfaces).
 In case of doubt, test the product suitability in an inconspicuous place.
Surface Damage
The combined use of different disinfectants and/or disinfectants and cleaning
CAUTION
agents may impair the product performance or damage surfaces of the
product.
Electric shock – Danger of death
Extreme caution must be taken when disinfecting live equipment!
SAFETY-
RELEVANT
Liquids must never be allowed to enter the system, e.g. the sockets or end
devices.

Risk of explosion

SAFETY-
RELEVANT
If disinfectants are used which form explosive gas mixtures, they pose a risk to
life and health due to the risk of explosion.
 Disconnect the device from the mains electricity before cleaning.
 Wipe sparingly with liquid and/or use disinfectant wipes.
 Use wipes; DO NOT spray clean and/or spray disinfectant.
 Disconnect the device from the mains electricity before disinfecting.
 Wipe sparingly with liquid and/or use disinfectant wipes.
 Use wipes; DO NOT spray clean and/or spray disinfectant.
DOK-ID: GDX01G01, BE #6600013 19 / 22