General Information; Manufacturer; Operation And Operator; Symbols, Safety And Warning Instructions - MAVIG GD50S101-PH Gebrauchsanweisung

1.

General Information

1.1.

Manufacturer

1.2.

Operation and Operator

Only appropriately trained personnel may operate, clean and disinfect the product (medical and
radiological technical knowledge in accordance with country specific regulations).
The instructions for use are valid only after a properly conducted first commissioning.
Product must be thoroughly cleaned and disinfected before first use.
1.3.

Symbols, Safety and Warning instructions

SAFETY- Safety relevant instructions are mandatory and must be followed. Non-
RELEVANT observance could result in injury or death of one or more persons. You must
read and understand these instructions before starting up the systems.
Cautions must be observed, otherwise the device may be damaged or
CAUTION malfunction. You must read and understand these instructions before starting
up the system.
Comply with instruction
The accompanying documentation must be observed. These are available in
digital form in various languages on the specified website.
Collision warning
Collisions with other equipment can cause structural failure of the suspension
arm, resulting in operator or patient injury. If collision occurs, the arm has been
inspected immediately by a qualified service technician.

Risk of injury

SAFETY
The manufacturer must be immediately informed of any damage to the system.
RELEVANT
Stop all use of the device until the damage is rectified: Disconnect the system
from the mains. Do not stand or work beneath the system.
MAVIG GmbH
Stahlgruberring 5
81829 Munich
Germany
Phone +49 (0) 89 420 96 - 0
Fax +49 (0) 89 420 96 - 200
eMail info@mavig.com
Web www.mavig.com
DOK-ID: GDX01G01, BE #6600013 15 / 22