Cleaning And Care - Klarstein VINSIDER 52 UNO Bedienungsanleitung

EN
40

CLEANING AND CARE

Cleaning the appliance
• Switch off the appliance first and disconnect the power cord from the mains socket.
• Remove all the contents.
• Wipe the inside with a damp cloth dipped in lukewarm water with a little washing-
up liquid.
• Make sure the rubber seal on the door is clean so that the appliance remains
efficient.
• The exterior of the wine refrigerator should be cleaned with a mild detergent.
• Dry the inside and outside with a soft cloth.
• Dust and anything else that clogs the exhaust vents will reduce the cooling capacity
of the appliance. If necessary, vacuum the exhaust air opening.
Decommissioning in the event of absence
• First switch off the appliance. Then disconnect the power cord from the power outlet.
• Remove all the contents.
• Clean the appliance.
• Leave the lid on slightly to prevent condensation, mould or odours from forming.
Installation at another location
• First switch off the appliance. Unplug the power cord.
• Remove all the contents.
• Secure all loose items with tape.
• Tape up the doors.
Energy saving recommendations
The wine refrigerator should be placed in the coolest place in the room, away from
appliances that generate heat, heating pipes and direct sunlight. Make sure that the
door is properly closed when the wine refrigerator is switched on.