Troubleshooting - Klarstein VINSIDER 52 UNO Bedienungsanleitung

TROUBLESHOOTING

Problem Possible cause and solution
The It is not plugged in.
appliance is
It is switched off.
not working.
The fuse is out or blown.
The appliance Check the temperature settings.
is not cold
The environment requires a lower setting.
enough.
The door was opened too often.
The door is not closed properly.
The door seal does not seal properly.
The light The appliance is not plugged in.
doesn't work.
The fuse is out or blown.
The light bulb is broken.
The light switch is set to "off".
The appliance The room temperature is higher than usual.
goes on and
There are many bottles in the appliance.
off frequently.
The door was opened too often.
The door is not closed properly.
The temperature is not set correctly.
The door seal does not seal properly.
Vibrations Check if the appliance is level.
The appliance The coolant is circulating. Noises that occur as a direct result of this
is very loud. are not a defect, but normal.
After each cooling cycle, you hear a gurgling sound because there is
still coolant in circulation.
The contraction and expansion of the inner walls can cause cracking.
The appliance is not level.
The door The appliance is not level.
does not
The door was turned upside down and not fitted properly.
close
The seal or the magnet are damaged.
properly.
The shelves stick out too far.
EN
41