AVENLI SPA4 Benutzerhandbuch Seite 12

Assembling
1) Unfold the inflatable
spa over the base
protector.
4) Connect the inflation
hose to the pump on the
socket.
7) Wait 60 seconds for SPA
shaping
10) Insure valve tightened
by tools.
2) Before inflating,
assemble connecting tube
into SPA pool
5) Insert the inflation hose
into the inflatable spa.
8) Make up air through a
hand pump equipped
11) Screw the cap firmly in
place.
3) Inspect spring inside
valve in the upspring status
6) Connect the pump unit
then press the button to
inflate the spa.
9) Complete inflating and
remove the inflate tube
12) Connect the unit pump
to the pool using the 3
connectors to screw.
Ensure the icons on the
pump and the pool match
up.