Herunterladen Inhalt Inhalt Diese Seite drucken

Contents; Safety Instructions, Proper Use - ALFRA ROTABEST 100 B RL-E Bedienungsanleitung

Metallkernbohrmaschine
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

eN
dear customer,
Thank you for purchasing an ALFRA product. Read these operation instructions closely before using
your device for the first time and keep them for later reference.
SAFETy inSTRucTiOnS
During work with this machine, improper handling and/or poor maintenance result in significant hazards
which can lead to destruction of the machine and serious accidents with considerable injuries. Observe
all safety instructions of this operation manual and contact the manufacturer if you have any questions.
!
• During drilling operations on walls and ceilings, the Metal Core Drilling Machine must be safeguarded
with the included safety belt. The magnetic adhesion is not maintained in case of a failure of circuit.
• The cut core will be ejected automatically by the ejector pin. The ejector pin could possibly break in
case of improper use.
• Only use undamaged power cord and extension cords and regularly check on damages.
Danger of an electric shock!
• Power supply and voltage details at the device must correspond.
• When working with this device, wear the following protection equipment:
Safety goggles, appropriate footwear, ear protection, hair net (for long hair), gloves, possibly also
apron and safety helmet.
• The place of installation for the magnet foot must be clean and rustfree. Remove lacquer and filler.
• Do not execute any electric welding on the workpiece on which the Metal Core Drilling Machine is used.
• Prior to all operations mount coolant unit.
people with cardiac pacemakers or other medical appliances may only use this machine
following approval by their physician.
never touch rotating parts! keep hands and fingers away from the work area while
the motor is running! Failure to do so can result in severe injuries!
pROpER uSE
This magnetic core drilling machine with switchable magnetic clamp is intended for drilling with core or
solid drills on ferromagnetic workpieces. It may only be used in a dry environment which is protected from
the weather. The machine may be used horizontally, vertically or overhead.
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

18636

Inhaltsverzeichnis