VOLTCRAFT SEM5000 Bedienungsanleitung Seite 72

OFF flashes: briefly press the
button; you cannot set the
idle time on the OFF interface.
ON flashes: press the
flashes.
Use the button
flashing input position.
Briefly press the
next input position.
Once the last input position has been confirmed, the display
stops flashing.
When the display is not flashing, briefly press the
skip to the next setting or briefly press the R button to exit the
setup menu.
72
button; the first position of the time
or to modify the number value of the
button to confirm and then select the
Ed it values
button to