Probuilder 49008 Gebrauchsanweisung Seite 57

EU DECLARATION OF CONFORMITY
Manufacturer:
Company name
Address
Postal code
City
Country
This declaration of conformity is issued under the sole responsibility of the manufacturer and
herewith declares that the product
Product identification:
is in conformity with the provisions of the following EC directive(s)
(including all applicable amendments
Reference no.
2006/42/EU
2014/30/EU
2011/65/EU
References of standards and/or technical specifications applied for this declaration of
conformity, or parts there of:
Harmonized Standard No.
EN IEC 63000:2018
EN 60745-1:2009+A11:2010
EN 60745-2-3:2011+A2:2013
+A11:2014+A12:2014+A13:2015
EN ISO 12100:2010
EN 55014-1:2021
EN 55014-2:2021
EN IEC 61000-3-2:2019+A2
EN 61000-3-3:2013+A1+A2:2021
Other standards and/or technical specifications :
Standard of technical
procedure
(1) Where appropriate, the applicable parts or clauses of the standard or the technical specification
should be referenced.
Kolding 25/10/2022
Kirsten Vibeke Jensen
CSR & Compliance Manager
Schou Company A/S
Nordager 31
6000
Kolding
Denmark
DISC-TYPE SANDER 710W, Brand: PROBUILDER, Item no: 49008
Title
Machine Directive
Electromagnetic Compatibility
Restriction of the use of certain hazardous substances in
electrical and electronic equipment
Title of the standard
Technical documentation for the assessment of electrical
and electronic products with respect to the restriction of
hazardous substances
Hand-held motor-operated electric tools. Safety. General
requirements
Hand-held motor-operated electric tools. Safety. Particular
requirements for grinders, polishers and disk-type sanders
Safety of machinery. General principles for design. Risk assessment
and risk reduction
Electromagnetic compatibility - Requirements for household
appliances, electric tools and similar apparatus - Part 1: Emission
Electromagnetic compatibility - Requirements for household
appliances, electric tools and similar apparatus - Part 2: Immunity -
Product family standard
Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for
harmonic current emissions (equipment input current ≤16 A per
phase)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <= 16 A per phase
and not subject to conditional connection
Title of the standard or technical procedure
GB
57