Samson 024.50 Originalbetriebsanleitung Seite 66

Original Betriebsanleitung
Typ 024.50
→ Screw contact-free limit switch onto actuator using a suitable tool
If the position indicator cannot be screwed in
completely, please check the setting of the
spindle extension. If this does not lead to
success, our customer service will be pleased
to help you.
→ Plug on M12 cable and screw on.
→
Depending on the actuator, the
o
LS6: screw in without extension
o
LS7: screw in with spindle extension and lock nut
o
LS8: screw extension into spindle to stop without locknut and tighten
© 1994 - 2022 SED Flow Control
Notice
contact-free limit switch
24
must be set accordingly:
BA_024.50_v03 Version: a