Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.3. Removing the transmitter
Press and hold two buttons of the receiver simultaneously, diodes C1, C2, C3 will start
blinking, then press any button of the transmitter to be removed.
Performing the procedure of removing a transmitter removes all remotes of this
transmitter assigned to the receiver.
Holding the buttons for too long will format the receiver's memory.
C1
C2
C1
C3
MOM
MONO
C2
BIST
POW
C3
PRESS AND HOLD
1
THE TWO RECEIVER
BUTTONS
Fig. 4 Removing the transmitter.
4.4.Setting the operating mode of the output channel to bistable or momentary
In order to set the C1/C2/C3 channel mode, press and release the C1/C2/C3 button, the red
C1/C2/C3 diode will light up and the yellow diode indicating the currently set mode of the
MOM / MONO / BIST channel will light up. By repeatedly pressing the C1/C2/C3 button,
set the required operating mode.
The yellow LED with the description
The yellow LED with
To confirm the selected operating mode, press and hold the channel button of the
C1/C2/C3 receiver. C1/C2/C3 diode will blink and then the diodes will turn off. The
operating mode has been saved.
C1
C2
C1
C3
MOM
MONO
C2
BIST
POW
C3
1
PRESS
C1/C2/C3
BUTTON
Fig. 5 Setting of bistable and momentary mode.
C1
C2
C1
C3
MOM
MONO
C2
BIST
POW
C3
2
C1, C2, C3 LEDS WILL
START BLINKING
MOM
BIST
description will set the
C1
C2
C1
C3
MOM
MONO
C2
BIST
POW
C3
2
C1/C2/C3 + MOM/MONO/BIST
LED WILL TURN ON
3
PRESS A BUTTON
ON THE REMOTE CONTROL
will set the
momentary mode
bistable mode
C1
C2
C1
C3
MOM
MONO
C2
BIST
POW
C3
3
PRESS
C1/C2/C3
LIGHT UP
MOM/BIST LED
19
C1
C2
C3
MOM
MONO
BIST
POW
C1, C2, C3 LEDS TURN OFF
4
REMOVAL SUCCESSFUL
RELEASE THE BUTTONS
.
.
C1
C2
C3
MOM
MONO
BIST
POW
4
TO
CONFIRM BY HOLDING
DOWN
C1/C2/C3
C1
C2
C3
C1
C2
C3
BUTTON
Werbung
Inhaltsverzeichnis
