dtm mark Montage- Und Betriebsanleitung Seite 17

1. General information
MARK is an industrial, bidirectional 3-channel radio receiver designed to work with gate
controllers, roller shutters and other automation devices, where it is required to give a
control impulse over long distances. It is powered by 230V AC. Supplied in a surface-
mounted housing with IP66 tightness for outdoor installation. Dedicated to work in
industrial automation, in halls and warehouses.
2.Technical data
power supply:
•
system:
•
operating frequency:
•
type of communication:
•
receiver relay outputs
•
(quantity / type):
output operation modes:
•
ON time in monostable mode: 0.5 / from 1 to 6553s / from 1 to 109 min.
•
inputs (number / type):
•
receiver memory:
•
tightness degree:
•
tile dimensions:
•
casing dimensions:
•
mounting method:
•
working temperature:
•
antenna:
•
230VAC, 50Hz
CSS
868,30MHz / 868,45MHz
two-way communication
3 NO type
AC1 = 16A / 250VAC
AC15 = 1.5A / 240V
AC5 = 0.5kW 240VAC, single phase motor
DC1 = 16A / 24V DC
DC13 = 0.1A / 250V
monostable, bistable, momentary
3 control NO type
150 remotes of theCSS system
IP66
100x140x40 mm
150x190x75 mm
outside or in housings of other devices
-20°C to +55°C
868MHz with RP-SMA connector
15
EN