Record Mode - auna Franklin 388 DAB Bedienungsanleitung

EN
44
Resetting the unit to factory settings
If the unit is no longer working after a malfunction or you want to remove
all stored stations easily, you can reset the unit in DAB mode as described
below.
1. Press and hold the Stop /Info button (8) for 5 seconds. "Press Enter key
to Reset" is displayed on the LCD screen (2).
2. Press the enter button (23) to confirm the reset. Then the unit will start
resetting and all information will be deleted.

RECORD MODE

• Remove the needle guard.
• Make sure that the tone arm is detached from the tone arm rest before
operation and then reattached.
Pickup
Needle guard
1. Select the "Phono" mode with the phono button (24)
2. Set the speed control (31) to the correct position depending on the type
of record to be played.
3. Place the record on the turntable (use the spindle adapter (30) if
necessary).
4. Lift the tone arm off the tone arm holder (33) and slowly move it
towards the record. The turntable will start to spin.