Aux-In Connection; Switch-Off Function - auna Franklin 388 DAB Bedienungsanleitung

5. Start playback on the mobile device and enjoy the music via the main
unit.
6. To disconnect the BT connection, press and hold the play/pause button.
Note: You can press the
on the main unit or remote control to control music playback.

AUX-IN CONNECTION

• Connect another audio device (e.g. portable CD player, MP3 player, tape
recorder, etc.) to this unit using a 3.5 mm RCA cable (not supplied).
• Connect one end of this cable to the 3.5 mm headphone jack on the
external audio device and the other end to the AUX-In connector (35) on
the back of the device.
• If you connect the unit in this way, you can play the music already stored
on the connected unit or record the music on cassette as described
above in the section "Recording".

SWITCH-OFF FUNCTION

The switch-off function can be used to automatically put the unit into
standby mode at a preset time.
1. Press and hold the sleep button (11). The LCD screen (2) displays the
power off indicator "zzz" and the LCD screen displays the sleep timer in
the order 90 > 80 > 70 > 60 > 50 > 40.... minutes displayed. Release the
sleep button (11) as soon as the desired switch-off time is displayed.
2. The unit is automatically switched off and put into standby mode after
the selected time.
3. To exit the shutdown mode, press the sleep button (11) again, the display
"zzz" is no longer shown on the LCD screen (2).
button (22) or the or buttons (26/12)
EN
53