Fm Radio - auna Franklin 388 DAB Bedienungsanleitung

EN
42

FM RADIO

Manual station search
1. To switch on the unit, press the On/Standby button (7) and select FM
mode with the DAB/FM button (24).
2. Select the desired station with the buttons
3. Adjust the volume with the
Automatic station search
1. Set the FM mode.
2. Briefly press the button
upwards and stops at the next available radio station. Briefly press the
button (12). The device starts the station search downwards and
stops at the next available radio station. If an RDS signal is received
from the set station, the unit automatically sets the time.
3. Adjust the volume with the
FM and FM stereo reception
• The unit is set to FM mode at the factory. When an FM stereo signal is
received, "Stereo" is automatically set. If the stereo signal is weak and
the unit is therefore noisy during playback, it is recommended to switch
to mono by pressing the enter button (23).
• Check the FM reception by pressing the enter button (23).
Tips for best reception
FM/DAB: the receiver works with a detachable DAB/FM cable antenna.
Make sure the antenna has been inserted into the antenna connector (36)
and fully unwound to ensure the best reception.
(12) or
or buttons (3).
(26). The unit starts the station search
or volume buttons (3).
(26).