Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
24
Remote battery installation
The infrared remote control requires 2 PCS UM-4 R03, AAA (3V)
Battery(excluded)
Power ON/OFF
1. Press POWER to turn the system on. The power indicator lights up.
2. Press the function selector buttons (FM/CD/USB/AUX IN) to select the
desired function.
3. Start to adjust the volume by using the volume control button.
4. When finished listening press POWER again to turn off the system. The
power indicator goes off.
Remark: The unit is comply with ERP2, the unit will turn to Standby mode if
there is no operation on the unit after 15 mins, please press POWER button
if you want to re-start the unit.
FM MODE
1. To turn the system on, press the POWER button.
2. Make sure you have connected the FM antenna cable to the back of the
unit.
3. Press the "TUNER" button for FM radio or press the FUNCTION button
to select the radio mode.
4. Turn the TUNING control to tune to the desired radio station. The FM
ST/REC display will flash.
5. Turn the TUNING KNOB (22) to manually select the frequency.
Werbung
Inhaltsverzeichnis
