3 - USE
• 400W
• 800W
• 1200W
• Knob set to "OFF"
(appliance OFF)
If one of the three power
levels on the left side of the
knob is selected
the appliance will oscillate while heating within a 90° angle.
If heating without oscillation is required, select one of the 3
power levels on the right side of the knob.
The appliance is equipped with an overturning switch. If the
appliance is overturned, it automatically stops operation.
3.1 - Protection from overheating
The appliance is equipped with a protection system from overheating which turns it off
if it overheats. In this case:
a. Switch the appliance off through the switch (6) and disconnect the power plug;
b. remove the possible cause (air intake grid clogged, obstacles in front of the air
outlet or inlet, etc.);
c. let the appliance cool down for 30 minutes;
d. restart the appliance.
If the issue persists, turn the appliance off, disconnect the plug from the power outlet
and please contact the retailer or the technical assistance service.
4 - MAINTENANCE AND CLEANING
EN- 12
Before
performing
cleaning or maintenance in-
tervention on the appliance,
disconnect the plug from the
power socket and wait for
the fan to stop completely.
OFF
1200W
800W
TURN
400W
OFF
any
400W
800W
1200W