Cleaning - Olimpia splendid CALDO CRYSTAL Installations, Bedienungs And Wartungsanweisungen

Before performing any cleaning or
maintenance intervention on the ap-
pliance, disconnect the plug from the
power outlet and wait for the hot parts
to cool down.
Use a dry cloth to clean the appliance and the re-
mote control.
If the appliance is very dirty, it is possible to use a cloth moistened with warm water (max
50°C) and a mild detergent to clean its external parts
Dry with a dry cloth.
Make sure the appliance is completely dry before reconnecting
the plug to the power outlet.
Do not use a chemically-treated or anti-static cloth to clean the
unit.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the
plastic surface.
Do not use oils, chemical substances or abrasive products to
clean the appliance.
Do not wash or immerse the appliance with/in water.
Use a vacuum cleaner to remove dust from the air inlet/outlet grids.
In case of an appliance malfunction, do not try to disassemble it
and please contact the retailer or the technical assistance service
instead.
If you do not intend to use the appliance for a particularly long period of time or if you
need to perform works which could produce a lot of dust, it is advised to remove the
appliance from the wall and to store it in its original packaging together with the remote
control (without batteries).
Store everything in a fresh and protected from humidity environment.
EN - 22

10 - CLEANING

10.1 - Appliance preservation
(figure L) .