Cleaning The Rotary Brush - Taurus HOMELAND UNIQUE Bedienungsanleitung

CLEANING THE ROTARY BRUSH:

- To remove the brush:
- At the bottom of the brush, press the button
located at the rear to unhook the side part that
fixes the brush and pull it out. (Fig.6).
- Remove the brush and clean.
- To reassemble, follow the above instructions
but in reverse.
SUPPLIES
- Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
- Always use original supplies, designed specifi-
cally for your appliance model.
- These supplies are available in specialist
shops.
HOW TO REMOVE THE BATTERIES FROM
THE INTERIOR OF THE DEVICE:
- CAUTION: It is important that the batteries are
fully discharged prior to its withdrawal from the
apparatus.
- CAUTION: the appliance must be disconnec-
ted from the supply mains when removing the
batteries.
TO REMOVE THE BATTERIES, ONCE THE
LIFE OF THE APPLIANCE, PROCEED AS
FOLLOWS:
- Remove the upper casing of the appliance, the
part located above the handle. To remove the
casing, it is necessary to lever the lower part to
release the tabs that fix it. (Fig.7).
- Identify the battery and cut the 4 cables
connected to the battery. In order to avoid
short-circuit risks, protect its conductive part
with insulating tape. (Fig.8).
- Safely remove the battery from its housing.